Differences

This shows you the differences between two versions of the page.

--- capacitor_relacement [2026/07/10 06:12] – [Macintosh Quadra 840AV] croissantking
+++ capacitor_relacement [2026/07/26 22:50] (current) – [Macintosh Portable (820-0219-A)] Froggy814
@@ Line 37: / Line 37: @@
 ==== Clean the Board ====
-Before soldering on your new caps, be very sure to thoroughly clean the board.  Many people have put the logic board into the dishwasher and run it without detergent.  This seems to work particularly well.  Taking it to the sink or tub of water with a toothbrush has also proven to be a good way to do it.  Several days later, when the logic board is thoroughly dry, it's time to solder on your new capacitors.
+Before soldering on your new caps, be very sure to thoroughly clean the board.  Many people have put the logic board into the dishwasher and run it without detergent.  This seems to work particularly well.  Taking it to the sink or tub of water or rubbing alcohol with a toothbrush has also proven to be a good way to do it.  Several days later, when the logic board is thoroughly dry, it's time to solder on your new capacitors.
 ==== Solder On the New Capacitors ====
@@ Line 167: / Line 167: @@
 Replace with Axial Lead Electrolytic:
   * 3x 470µF (25V) - C8, C16, C20
+On the Trackball Lead Electrolytic:
+  * 1x 10µF (16V) Dimensions: 2mm Lead, 4.5mm Wide, 8mm Tall
+  * 1x 1µF (50V) Dimensions: 2mm Lead, 4mm Wide, 5mm Tall. Note: this one can be as tall as 8mm.
 Gallery: