Differences

This shows you the differences between two versions of the page.

--- capacitor_relacement [2026/06/24 04:18] – wthww
+++ capacitor_relacement [2026/07/26 22:50] (current) – [Macintosh Portable (820-0219-A)] Froggy814
@@ Line 12: / Line 12: @@
 Promptly purchase a set of replacement capacitors, preferably in "tantalum" form.  These are solid and will not ever leak.
-==== Remove The Old Capacitors ====
+==== Remove the Old Capacitors ====
 While every Mac is different, take a moment to read through the basic instructions quoted below.
@@ Line 35: / Line 35: @@
 </WRAP>
-==== Clean The Board ====
+==== Clean the Board ====
-Before soldering on your new caps, be very sure to thoroughly clean the board.  Many people have put the logic board into the dishwasher and run it without detergent.  This seems to work particularly well.  Taking it to the sink or tub of water with a toothbrush has also proven to be a good way to do it.  Several days later, when the logic board is thoroughly dry, it's time to solder on your new capacitors.
+Before soldering on your new caps, be very sure to thoroughly clean the board.  Many people have put the logic board into the dishwasher and run it without detergent.  This seems to work particularly well.  Taking it to the sink or tub of water or rubbing alcohol with a toothbrush has also proven to be a good way to do it.  Several days later, when the logic board is thoroughly dry, it's time to solder on your new capacitors.
 ==== Solder On the New Capacitors ====
@@ Line 43: / Line 43: @@
 Again, practice on garbage boards if you are unsure of yourself.  When soldering new caps back on, pay special attention to the polarity of the capacitor and the markings on the logic board.  Often there will be a positive (+) symbol printed on the board.  The side of the tantalum capacitor that has a stripe is positive (+), so face that side of the capacitor toward the (+) symbol.  With surface-mount tantalums, it helps to apply some solder to both sides of the new capacitor first.  Then line the cap up on your logic board and simply heat both sides to make a connection.
-===== Capacitor Quantity and Type, for Macintosh Models =====
+===== Capacitor Quantity and Type for Macintosh Models =====
 Some logic board revisions may have a different number of capacitors, so make sure to look first and verify this information.  If yours is different, please create an account here and add it to the page by clicking the edit button up on top.  Note that these numbers include capacitors only on the logic board and not, for example, in the power supply.  Post on the [[http://68kmla.net/bb|68kMLA Forums]] if you suspect you have bad caps in your power supply and would like help.
@@ Line 78: / Line 78: @@
 Replace with Tantalum:
-  * 11x 47µF (?V)
+  * 11x 47µF (25V)
-  * 2x 10µF (?V)
+  * 2x 10µF (16V)
 Replace with Electrolytic:
-  * 3x 470µF (?V)
+  * 3x 470µF (16V)
-  * 1x 220µF (?V)
+  * 1x 220µF (16V)
 ==== Macintosh IIsi (820-0301-A) ====
@@ Line 123: / Line 123: @@
 ==== Macintosh LC III, Performa 450 (820-0650-B, Rev. D) ====
+**Warning!**
+The -5v Rail Capacitor on the LC III is labelled incorrectly on the silk screen and usually / always installed backwards from factory. While this wasn't ideal with a conventional electrolytic, when installing tantalum capacitors this can result in sudden and violent failure.
+**Prior to installing capacitor C22, use continuity testing on a multimeter to confirm the orientation.** As this is a negative power rail, the side with continuity to ground is the +ve side of the capacitor (i.e. the side marked with a band on a tantalum capacitor).
+See : [[https://68kmla.org/bb/threads/lciii-recap-apple-design-fault-47uf-reversed.27834/|https://68kmla.org/bb/threads/lciii-recap-apple-design-fault-47uf-reversed.27834/]]
 Replace with Tantalum:
-  * 5x 47µF (16V)
+  * 5x 47µF (25V)
   * 5x 10µF (16V)
   * 1x 100µF (6.3V)
@@ Line 131: / Line 138: @@
 ==== Macintosh LC III, Performa 450 (820-0650-A) ====
 Replace with Tantalum:
-  * 5x 47µF (16V) - C8, C19, C20, C21, C22
+  * 4x 47µF (16V) - C8, C19, C20, C22
+  * 1x 47µF (25V) - C21
   * 5x 10µF (16V) - C2, C4, C5, C7, C18
   * 1x 100uF (6V) - C13
+Alternatively, it is acceptable to use 25V parts for all 47µF here to avoid ordering multiple different items.
 Gallery:
@@ Line 157: / Line 167: @@
 Replace with Axial Lead Electrolytic:
   * 3x 470µF (25V) - C8, C16, C20
+On the Trackball Lead Electrolytic:
+  * 1x 10µF (16V) Dimensions: 2mm Lead, 4.5mm Wide, 8mm Tall
+  * 1x 1µF (50V) Dimensions: 2mm Lead, 4mm Wide, 5mm Tall. Note: this one can be as tall as 8mm.
 Gallery:
@@ Line 164: / Line 178: @@
 </gallery>
-==== Macintosh Quadra 840AV (820-0382-10) ====
+==== Macintosh Quadra 840AV ====
+**__Logic Board (820-0382-10)__**
 Replace with Tantalum:
   * 2x 10µF (16V) - C1, C35
   * 13x 47µF (16V) - C2, C27, C48, C53, C56, C59, C60, C62, C63, C64, C69, C75, C76
-Gallery:
+**__Power Supply (Delta SMP-220DB):__**
-<gallery>
-Image:Quadra840av-logicboard.jpg|Before Replacement
+SMP-220DP-1:
-Image:Quadra840av-restored.jpg|After Replacement
-</gallery>
+^ Capacitor ^ Value ^ Size in mm\\ (length x dia) ^
+| C104, C105 | 3300μF 10V | 36x13 |
+| C106 | 2200μF 10V | 28x13 |
+| C107 | 1000μF 10V | 20x10 |
+| C154, C156 | 1000μF 16V | 28x10 |
+| C252, C807 | 470μF 35V | 20x10 |
+| C253 | 220μF 16V | 15x18 |
+| C513 | 10μF 50V | 11x5 |
+{{:smp220dp1.jpg?400}}
+\\ SMP-220DP:
+^ Capacitor ^ Value ^ Size in mm\\ (length x dia) ^
+| C1, C2 | 820μF 200V | 40x30 |
+| C301 | 470μF 35V | 20x10 |
+| C302 | 0.47μF 50V | 11x5 |
+| C304 | 4.7μF 50V | 11x5 |
+| C952 | 1μF 50V | 11x5 |
+{{:smp220dp.jpg?400}}
+\\ DC-267:
+^ Capacitor ^ Value ^ Size in mm\\ (length x dia) ^
+| C507 | 2.2μF 50V | 11x5 |
+| C511 | 22μF 50V | 11x5 |
+| C532, C601 | 10μF 50V | 11x5 |
+| C655, C674 | 4.7μF 50V | 11x5 |
+| C783 | 1μF 50V | 11x5 |
+| C784 | 100μF 25V | 11x7 |
+{{:dc267.jpg?400}}
+\\ DC-230:
+^ Capacitor ^ Value ^ Size in mm\\ (length x dia) ^
+| C804 | 2.2μF 50V | 11x5 |
+{{:dc230.jpg?400}}