Flash drive test results

From 68kMLA Wiki
Revision as of 22:42, 26 July 2008 by Bunsen (talk | contribs) (Undo revision 3385 by Bunsen (Talk))
Jump to: navigation, search

Results of attempts to use various flash media as drives in Macs. Other media types can be included (ie IDE on SCSI adapters, etc.)

Please copy and paste the blank line at the bottom, then enter your data above it. That way everyone will have a template they can use.

If you have a full page of test results with speeds etc, please link it, for now.

Bunsen


Please try to use consistent names for models of Mac, adapters, media, software etc, as this will help with table sorting.

Flash type Brand Model Size MB DMA/ UDMA Adapter Adapter Port Mac OS Seen [1] OEM data [2] Format Formatted with [3] VM/ swap Boot Note Links Tested by
ATA_Flash PC_Card Cisco - 1000 - - - Cardbus [4] PB Lombard 10.2.8 Y Model:TXN,PCI1210-00 Vendor:104c Device:ac1e Y Disk Utility - N[5] thanks coius! CiscoATAFlash Bunsen
CF Kingston Ultra 100x 1024 N Generic CF- PCMCIA Adtron PCMCIA -SCSI SCSI LC 475 8.1 Y - Y Drive Setup (OS X 10.4.11) Y [6] Y - Adtron SDDS Cardpak™ register
CF Kingston Ultra 100x 1024 N Generic CF- PCMCIA - PCMCIA PB 1400 8.1 + 9.2.2 Y -,[7] Y Drive Setup (OS X 10.4.11) YCite error: Closing </ref> missing for <ref> tag Y [8] - register
CF Kingston - 128 N Generic CF-IDE 2.5" - internal IDE PB 1400 8.1 + 9.2.2 Y [9], [7] Y Drive Setup (OS X 10.4.11) Y Cite error: Closing </ref> missing for <ref> tag N [10] - register
SDHC Intenso - 4096 N Delock SDHC - PCMCIA - PCMCIA PB 1400 8.1 + 9.2.2 Y [11], [7] Y Drive Setup (OS X 10.4.11) YCite error: Closing </ref> missing for <ref> tag Y [8] - register
CF Kingston Ultra 100x 1024 N Generic CF- PCMCIA Adtron PCMCIA -SCSI SCSI G3 DT 8.1 Y - Y Drive Setup (OS X 10.4.11) Y [6] Y - Adtron SDDS Cardpak™ register
- - - - - - - - - - - - - - - - - -

Notes

  1. In device table, SCSI Probe, System Profiler, Drive Setup, on desktop - anywhere really
  2. As shown in Apple System Profiler or other hardware diagnostic
  3. unless shown, version matches OS
  4. Will try in a 16 bit slot and see if it helps (ie in a 1400)
  5. Bad blocks, many failed installs, attempted repairs. One apparently successful install: volume still not available in Startup Disk
  6. 6.0 6.1 Virtual Memory works, but it usually is not recommended to use flash memory for VM (citation needed). Cite error: Invalid <ref> tag; name "VM_and_flash_memory" defined multiple times with different content
  7. 7.0 7.1 7.2 Data obtained with Apple System Profiler v. 1.3.2. Apple System Profiler v. 2.6.3 crashes on a Power Book 1400 with Mac OS 9.2.2, but v. 1.3.2 is quite usable.
  8. 8.0 8.1 To prevent auto eject of the PCMCIA card on shutdown/restart install Mac OS 8.1 directly onto the CF card, without driver update. Copy desired System version to the card, afterwards.
  9. Type: harddisk, Bus: ATA Bus, ID: 0, Capacity: 122.2 MB, Vendor: Hitachi XX.V.3.3.0.0, Product ID: -, Revision: Rev. 0.00, Connection: ATA, Removable: N (in fact the medium IS marked as removable at boot time), Partitions: 1
  10. VM works, but drive is not cold bootable as it is not recognised by ROM driver.
  11. Type: PC Card, Bus: PC Card, ID: 0, Capacity: 3,7 GB, Vendor: Memory Card Adapter, Product ID: -, Revision: 67281306, Connection: ATA, Removable: Y, Partitions: 1