Difference between revisions of "Flash drive test results"

From 68kMLA Wiki
Jump to: navigation, search
(fixing long notes)
(Tidy up, remove "EXAMPLE", naming consistency)
Line 1: Line 1:
Results of attempts to use various flash media as drives in Macs
+
Results of attempts to use various flash media as drives in Macs.  Other media types can be included (ie IDE on SCSI adapters, etc.)
 +
 
 +
Please copy and paste the blank line at the bottom, then enter your data above it.  That way everyone will have a template they can use.
 +
 
 +
If you have a full page of test results with speeds etc, please link it, for now.
 +
 
 +
[[User:Bunsen|Bunsen]]
 +
 
 +
 
 +
Please try to use consistent names for models of Mac, adapters, media, software etc, as this will help with table sorting.
  
 
{| class="wikitable sortable" style="text-align:center" border="1"
 
{| class="wikitable sortable" style="text-align:center" border="1"
 
|-
 
|-
! Flash type !! Brand !! Model !! Size/MB !! UDMA !! Adapter 1 !! Adapter 2 !! Port !! Mac !! OS !! Seen !! OEM data !! Format !! Formatted with !! VM !! Boot !! Note !! Links !! Tested by  
+
! Flash type !! Brand !! Model !! Size MB !! DMA/ UDMA !! Adapter !! Adapter !! Port !! Mac !! OS !! Seen <ref>In device table, SCSI Probe, System Profiler, Drive Setup, on desktop - anywhere really</ref> !! OEM data <ref>As shown in Apple System Profiler or other hardware diagnostic</ref> !! Format !! Formatted with <ref>unless shown, version matches OS</ref> !! VM/ swap !! Boot !! Note !! Links !! Tested by  
|-
 
| CF || Crucial || XYZ123 || 128 || - || Generic CF- PCMCIA || Addtron PCMCIA -SCSI || SCSI || SE/30 || 7.1 || Y || Samsung ABC789 || Y || Drive Setup || N || N || EXAMPLE || - || [[User:Bunsen|Bunsen]]
 
 
|-
 
|-
| ATA-Flash PC-Card || Cisco || - || 1000 || - || - || - || Cardbus || PowerBook G3 '99 Lombard || 10.2.8 || Y || Model:TXN,PCI1210-00 Vendor:104c Device:ac1e || Y || Disk Utility || - || N || thanks [[User:coius|coius]]! || [[CiscoATAFlash]] || [[User:Bunsen|Bunsen]]
+
| [[ATA_Flash]] [[PCMCIA|PC_Card]] || Cisco || - || 1000 || - || - || - || [[Cardbus]] <ref>Will try in a 16 bit slot and see if it helps (ie in a 1400)</ref>|| [[Macintosh_PowerBook_G3_1999|PB Lombard]] || [[OS X|10.2.8]] || Y || Model:TXN,PCI1210-00 Vendor:104c Device:ac1e || Y || [[Disk Utility]] || - || N || thanks [[User:coius|coius]]! || [[CiscoATAFlash]] || [[User:Bunsen|Bunsen]]
 
|-
 
|-
| CF || Kingston || Ultra 100x || 1024 || N || Generic CF- PCMCIA || Addtron PCMCIA -SCSI || SCSI || LC475 || 8.1 || Y || - || Y || Drive Setup (Mac OS 10.4.11) || Y || Y || VM works, but I do not use it || - || [[User:register|register]]
+
| [[Compact Flash|CF]] || Kingston || Ultra 100x || 1024 || N || Generic CF- PCMCIA || Addtron PCMCIA -SCSI || [[SCSI]] || [[Macintosh LC 475|LC 475]] || [[Mac OS 8|8.1]] || Y || - || Y || [[Drive Setup]] [[OS X|(OS X 10.4.11)]] || Y || Y <ref>VM works, but I do not use it</ref> || - || - || [[User:register|register]]
 
|-
 
|-
| CF || Kingston || Ultra 100x || 1024 || N || Generic CF- PCMCIA || PCMCIA slot || (internal IDE) || PB 1400 || 8.1 + 9.2.2|| Y || - || Y || Drive Setup (Mac OS 10.4.11) || Y || Y ||<ref>To prevent auto eject of the PCMCIA card on shutdown/restart install Mac OS 8.1 directly onto the CF card, without driver update. Copy desired System version to the card, later.</ref>|| - || [[User:register|register]]
+
| [[Compact Flash|CF]] || Kingston || Ultra 100x || 1024 || N || Generic CF- PCMCIA || - || [[PCMCIA]] (internal [[IDE]]) || [[Macintosh Powerbook 1400|PB 1400]] || [[Mac OS 8|8.1]] + [[Mac OS 9|9.2.2]] || Y || - || Y || [[Drive Setup]] [[OS X|(OS X 10.4.11)]] || Y || Y ||<ref>To prevent auto eject of the PCMCIA card on shutdown/restart install Mac OS 8.1 directly onto the CF card, without driver update. Copy desired System version to the card, later.</ref>|| - || [[User:register|register]]
 
|-
 
|-
| CF || Kingston || - || 128 || N || Generic CF- IDE (2.5" hdd form factor) || - || internal IDE (hdd bay) || PB 1400 || - || Y || - || Y || Drive Setup (Mac OS 10.4.11) || Y || N || <ref>VM works, but drive is not cold bootable as it is not recognised by ROM driver</ref> || - || [[User:register|register]]
+
| [[Compact Flash|CF]] || Kingston || - || 128 || N || Generic CF-IDE 2.5" || - || internal [[IDE]] || [[Macintosh Powerbook 1400|PB 1400]] || - || Y || - || Y || [[Drive Setup]] [[OS X|(OS X 10.4.11)]] || Y || N || <ref>VM works, but drive is not cold bootable as it is not recognised by ROM driver</ref> || - || [[User:register|register]]
 
|-
 
|-
 
| - || - || - || - || - || - || - || - || - || - || - || - || - || - || - || - || - || - || - |
 
| - || - || - || - || - || - || - || - || - || - || - || - || - || - || - || - || - || - || - |

Revision as of 23:38, 22 July 2008

Results of attempts to use various flash media as drives in Macs. Other media types can be included (ie IDE on SCSI adapters, etc.)

Please copy and paste the blank line at the bottom, then enter your data above it. That way everyone will have a template they can use.

If you have a full page of test results with speeds etc, please link it, for now.

Bunsen


Please try to use consistent names for models of Mac, adapters, media, software etc, as this will help with table sorting.

Flash type Brand Model Size MB DMA/ UDMA Adapter Adapter Port Mac OS Seen [1] OEM data [2] Format Formatted with [3] VM/ swap Boot Note Links Tested by
ATA_Flash PC_Card Cisco - 1000 - - - Cardbus [4] PB Lombard 10.2.8 Y Model:TXN,PCI1210-00 Vendor:104c Device:ac1e Y Disk Utility - N thanks coius! CiscoATAFlash Bunsen
CF Kingston Ultra 100x 1024 N Generic CF- PCMCIA Addtron PCMCIA -SCSI SCSI LC 475 8.1 Y - Y Drive Setup (OS X 10.4.11) Y Y [5] - - register
CF Kingston Ultra 100x 1024 N Generic CF- PCMCIA - PCMCIA (internal IDE) PB 1400 8.1 + 9.2.2 Y - Y Drive Setup (OS X 10.4.11) Y Y [6] - register
CF Kingston - 128 N Generic CF-IDE 2.5" - internal IDE PB 1400 - Y - Y Drive Setup (OS X 10.4.11) Y N [7] - register
- - - - - - - - - - - - - - - - - -

Notes

  1. In device table, SCSI Probe, System Profiler, Drive Setup, on desktop - anywhere really
  2. As shown in Apple System Profiler or other hardware diagnostic
  3. unless shown, version matches OS
  4. Will try in a 16 bit slot and see if it helps (ie in a 1400)
  5. VM works, but I do not use it
  6. To prevent auto eject of the PCMCIA card on shutdown/restart install Mac OS 8.1 directly onto the CF card, without driver update. Copy desired System version to the card, later.
  7. VM works, but drive is not cold bootable as it is not recognised by ROM driver